Product Description

Deacidification of palm oil refining machine :This part adopt alkali refining method, that is use alkalis (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock, then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye, soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom.

Deodorization and Dehydration of palm oil refining machine :Usually ,there are some odors in the crude oil, it affects the quality of the edible oil . About our refining process, we usually use the direct steam to take odors away in the vacuum condition . General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot, thetemperature is very high, it also can finish the dehydration section.

Raw Materials

Cottonseed oil production plant

1. Oil content: 30%-35% 2. 45%-60% kernel; 40%-50% kernel 3. Moisure: 10%-12%

Production Capacity

We, mozambique Cereals And Oils machine Co.,Ltd, which can provide complete set of Cottonseed oil production plant ;

Input Capacity : 10TPD TO 5000TPD Input Raw Materials: Cottonseed

Flow Diagram Cotton Processing

2.1 Cleaning Section (Air selection)

To Remove the solid impurity from raw materials; ( stick,stone,leaf etc)

Due to the cottonseed with some cotton on surface, it lead to the lazy flow. That decides It is hard to remove the impurity by traditional screw sieve or destoner. By using air selection,It will solve this problem.

2.2 Flaking

Using double flaking roller to make the crushed soybean into flakes. It will further rupture oil cell and shorten the oil extraction distance for following solvent extraction

By deforming seed particles into flakes, press and shear forces are created, which will rupture the seed’s oil cells, making them more available to the extraction process. Flake thickness may vary between 0.25 and 0.3 mm

2.3 Cooking

adjusting the raw materials moisture and temperature in order to change hardness and plasticity and reduce the oil density.

vertical stack cooker is installed for this purpose. By the injection of live team into this type of machine. it is possible to adjust the moisture content of the conditioned seed and temperature.

2.4 Pre-pressing

After dehulling, the oil content in kernel is round 35%; by using the screw expeller to extract the part of oil to let oil content less than 18%; It will be good for next solvent extraction.

2.5 Dust Collecting system

Using dust collecting cyclone system to collect the dust during production. It guarantee the workshop and air is clean.

company Introduction

Company Profile

WorkGroup, which is in Ghana in Edible Oil Extraction and Refinery.with more than 60 years an ISO9001 approved company in Pakistan providing Turnkey Solution of solvent extraction plant,oil mill plant,edible oil refinery plant,oil seed processing plant etc,

Main Projects Scope:

—–30-5000T/D oilseeds pretreatment project

—–30-5000T/D oilseeds extraction project

—–10-1000T/D crude oil refining project

—–10-1000T/D crude oil fractionation project

—–5TPH-100TPH FFB Mill and CPKO Plant

—–Oilseeds protein, phospholipid project

—–Natural pigment extraction project

—–Grain Seed Flour processing project


Example Project Cottonseed Oil Production Plant
Example Project Cottonseed Oil Production Plant price
Example Project Cottonseed Oil Production Plant supplier

Oil Processing Machinery Related Products