Product Description

Deacidification of palm oil refining machine :This part adopt alkali refining method, that is use alkalis (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock, then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye, soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom.

In normal situation, there is pigment in the crude oil, we need to using the active clay to absorb thepigment away, after 20 mins, we use the vibrating filter to filter the waste clay away . If you want to get light color oil, you need to add more active clay . That is mean, the customer can accord to hisrequirement to control the oil color. This process is carried out under the vacuum condition.

Deodorization and Dehydration of palm oil refining machine :Usually ,there are some odors in the crude oil, it affects the quality of the edible oil . About our refining process, we usually use the direct steam to take odors away in the vacuum condition . General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot, thetemperature is very high, it also can finish the dehydration section.

>Product Application

100T/D Rice Bran Oil Equipment Product Line Automatic Control System
Our company has applied the automatic control system with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.>

Technological process introduction:
1.Rice Bran Pretreatment Flowchart

Rice bran’Floury product separation’Magnetic separator’Wet extrusion’Flat plate dryer’To extraction plant

2.Rice Bran solvent extraction Flowchart

Material embryos’Extraction’Wet meal’Evaporation’Cooling’Product meal packing
Mixed oil’Filter’Negative pressure evaporation Crude oil Solvent recovery
3. Semi-continuous Refining Equipment Flowchart:
Soybean Oil’ Water washing and alkali refining’ Dephosphorization degumming’decoloration’ continuous deodorization’ to fractionation and dewaxing workshop.

>Main Features

1) Low noise, cost-effective.

2)Long service life. Adopting advanced worcentral africa brand components in pneumatic parts ,electric parts and operation parts.

3) We are a group enterprise integrating scientific research, manufacturing, sales as one. Already built 35 years.

4) Running in a high automatization and intellectualization,no pollution. Main part’s raw material: stainless steel.

5) Automatic, Less labor cost.

Certifications

Machine Parts

Name: Magnetic separator

Remarks:

There are also metal impurities in rice bran sometimes, these impurities not only affect oil quality, but also is bad for machine working. Magnetic separator is mainly used to remove metal impurities in the rice bran pretreatment line.

Main Features

Name: Rotocel Extractor

Remarks:

Rotocel Extraction:
1.Adopt stainless steel fixed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good extraction effect;

2.The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;

3.The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage.

Machine Parts

Name: Desolventizer section
Original: China

Remarks:

The liquid from the extractor is the miscella containing grease and oil, which can be separated out according their different vaporization temperatures. Our company mainly uses vacuum evaporation technology, and it can reduce solvent leakage and consumption. The separated solvent vapour is cooled and recycled back to the extractor for reuse, which can improve the solvent efficiency.

Main Features

Name: Deodorization under part
Brand: FESTO
Germany
Remarks:

Deodorization tower:The qualified decolored oil enters into the spiral plate heat exchanger to recover most of the heat, and next goes to high pressure steam heat exchanger to be heated to the process temperature (240-260℃) and then enters the deodorization tower. The upper layer of combined deodorization tower is the packing structure which is mainly used to remove the odor producing components such as free fatty acid (FFA); the bottom layer is the plate tower which is mainly for achieving the hot decoloring effect and reducing the peroxide value of the oil to zero. Oil from the deodorization tower enters into the heat exchanger to recover most of the heat and makes further heat exchange with crude oil, and then is cooled to 80-85′ through the cooler. Add the required antioxidant and flavor agent, and then cool the oil below 50℃ and store it. Such volatiles as FFA from the deodorizing system are separated by the packing catcher, and the separated liquid is FFA at low temperature (60-75℃). When the liquid level in the temporary tank is too high, the oil will be sent to the FFA storage tank.

Pre-Sales Service

* Inquiry and consulting support. * View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine. * Engineers available to service machine overseas.

Packing & Delivery

Packaging
Size 12 (L) * 4(W) * 7 (D)
weight 1.2 T

Packaging Details

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
Packaging
Size 3 (L) * 4 (W) * 6 (D)
weight 300kg

Packaging Details

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
Extraction Oil Machine Equipment, Peanut Making Machine In Mozambique
Extraction Oil Machine Equipment, Peanut Making Machine In Mozambique price
Extraction Oil Machine Equipment, Peanut Making Machine In Mozambique supplier

Oil Processing Machinery Related Products