Product Description

Deacidification of palm oil refining machine :This part adopt alkali refining method, that is use alkalis (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock, then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye, soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom.

In normal situation, there is pigment in the crude oil, we need to using the active clay to absorb thepigment away, after 20 mins, we use the vibrating filter to filter the waste clay away . If you want to get light color oil, you need to add more active clay . That is mean, the customer can accord to hisrequirement to control the oil color. This process is carried out under the vacuum condition.

Deodorization and Dehydration of palm oil refining machine :Usually ,there are some odors in the crude oil, it affects the quality of the edible oil . About our refining process, we usually use the direct steam to take odors away in the vacuum condition . General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot, thetemperature is very high, it also can finish the dehydration section.

High quality Palm Fruit oil extractor machine

Raw material:many kinds of edible oil seeds
Supplier Type:Manufacturer
Steel material:Stainless or carbon steel
Turnkye project:YES
Engineers abroad service:YES
Installation guide service:YES
Port:LDngdao or the nearest port
Min.Order Quantity:1 Set/Sets palm oil plant
Packaging Details:Package: palm oil plant machine will be packed in containers, wooden cases or as required as the international export standard.
Delivery Detail:The machine will be delivered in 45 days after confirmation.

Quick Details

  • Condition: New
  • Usage: palm oil plant
  • Type: palm oil plant
  • Automatic Grade: Automatic
  • Production Capacity: 5T-300T/D palm oil plant
  • Voltage: 220V/380V or the local voltage
  • Power(W): Accprding to the capacity
  • Dimension(L*W*H): Accprding to the capacity
  • weight: Accprding to the capacity
  • Item: palm oil plant
  • Production process: degumming deacidification decolorization deodorization
  • Raw material: many kinds of edible oil seeds
  • Supplier Type: Manufacturer
  • Steel material: Stainless or carbon steel
  • Turnkye project: YES
  • Engineers abroad service: YES
  • Installation guide service: YES
  • Port: LDngdao or the nearest port

Packaging & Delivery

Packaging Details: Package: palm oil plant machine will be packed in containers, wooden cases or as required as the international export standard.
Delivery Detail: The machine will be delivered in 45 days after confirmation.

Company Information

Company Information

:
Our Strength:
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in
global grain and oil
industry.
2, We have deep cooperation withMachine Design Research Institute and
University of
technology. Our professor often go abroad attending grain and oil conference and forum.
3, We have completed service line including technical department, engineering department,
project department, electronic commerce department, domestic trade department and foreign trade department.
After signing contract, we will set up special team including engineers, installation technicians, drawing
designer, business person, after-sales service person, and so on. We will provide one-to-one service.

our service:
1, Whole set of equipment for production line.
2, Motor and power control system.
3, Installation material.
4, Installation and test-run.
5, Drawing of process description, equipment layout, foundation and hole, construction.
6, Drawing of power control.
7, Isolation and painting for equipment.
8, Water recycling and cooling system outside the plant (i.e. supplementary device).
9 Staff training and long-term technical service.

Main Business Field:
1, 10-500t/h oil material primary cleaning,drying and storage section turn-key project.
2, 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake
extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
3, 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop
type extractor,
4, DTDC separated machine, the full negative pressure evaporation, Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
5, 30-1000T/D continuous physical (chemical) refining line.
6, 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
7, 10-200T/D fatty acid esterification edible oil production line.

8, Some edible oil machine product line.

Available Oil Raw Materials:

Our Past Performance

palm oil mill craft:

FFBSterilizationThreshing(Separate the fruit from the bunch)Digesting(stirring the fruit)pressing Purification CPO refinery

Reception of palm oil mill:

1.The FFB bunch be transported to plant by truck, after be weighted by weighting bridge, the FFB will be loaded down to FFB Loading Ramp.

2.The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station.

3.Start on the hydraulic device, iron door be lifted.

4.FFB will fall down to the Palm Fruit screw conveyor, be transported to pretreatment plant, to Vertical sterilizer tank.

Weighbridge:

Sterilization of palm oil mill:

Use the high temperature to boil the bunch and sterilize(145C,90-120min). 1.By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.

2.Sterilizing tank: The inside diameter of sterilizing tank is 2000mm, length 12500mm, welded up by Q235B material(Chemical composition: C012~0.2%, Si0.12~0.3%, Mm0.3~0.7%, P

3.After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind the tank, then saturated steam,which pressure is 3bar and temperature is about 130.

4. After all the cooling air have been discharged out,close vent valve, proceed to sterilizing section. Sterilizing time is 55~60minutes. 5. The time of sterilizing is also according the kind of FFB, if the pressure is too high or the time is too long, palm fruit will be rot, also Resulting in the loss of oil, high temperature can change palm color.

6.Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer, cant open the sterilizing tank door until discharges out all steam and water.

7. Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.

Sterilizer:

Threshing of palm oil mill:

Separate the fruit from the bunch through strong vibrating.

1.The sterilized FFB will be transport to thresher platform by scraper conveyor.

2.We adopt advanced Drum type thresher, insider diameter is 1800mm, length is 5000mm. The material of main shaft is #45 steel (main chemical composition is C0.42~0.50%, Si0.17~0.37%, Mm0.50~0.30%, P0.035%, S0.035%, Cr0.25%, Ni0.25%, Cu0.025%).

3.Sterilized FFB be twisted and knocked in thresher. Palm fruit will be separated from empty bunch totally, fall on Fruit Scraper conveyor though fence, the empty bunch will be transported to Bunch Temporary tank by Bunch Scraper conveyor.

Thresher:

Digesting of palm mill:

Stirring the fruit, then digest again.

Pressing of palm oil mill:

Separate the flesh and kernel, get crude palm oil and kernel(no crack-send to the depericarper). And using automatic palm oil press machine.

Screw Press:

Clarification of palm oil mill:

Separate the oil and sludge(get 90% pure oil),the oil contains 45%-55% moisture, sludge and other wastes.

Purification of palm oil press machine and palm oil mill and palm oil machine. Oil purifying treatment-increase the purity.

Other machine:

Tricanter:

Desanding Tank:

BPV:

Turbine:

Kernel Silo:

FAQ

WHY CHOOSE WorkGroup?

1.Our company has been set up since 1982, It has been awarded the “The quality-star enterprise of China”

2.Our factory is also a group enterprise integrating scientific research, manufacturing, sales as one.

3.We have cooperated with Research Institute of Machine Design Company,University of technology school-enterprise cooperation in the oil equipment to carry out long-term, protein extraction, phospholipid extraction, etc. R & D and application of new technologies.

4.We have more than 200 employees ,among them ,there are 20 engineering technical personnel who hold intermediate and senior professional titles, and two highly reputed professors.

5.We have exported our machines to Moscow, Romania, zimbabwe, South Africa,, in Ghana, in Ghana, South Africa, tanzania, Indonesia, and so on. Our new customers can visit our demo machines in different countries.

Contact with me

High Quality Palm Fruit Oil Extractor Machine
High Quality Palm Fruit Oil Extractor Machine price
High Quality Palm Fruit Oil Extractor Machine supplier

Oil Processing Machinery Related Products