Product Description

1.Screening:Removing the chaff and broken rice in the rice bran, in case of they will influence the oil yield and the desolvent of wet meal in the next process. In the process of puffing section, the general requirement of impurity is less than 3%, and the requirement of crude fiber is about 8%.

2.Magnetic separation :Clearing the iron impurity which might be in the rice brain. Since in the process of puffing, the iron impurity will be harmful to the screw of extrusion machine, affect the puffing effect. As the rice brain particles are small and poor liquidity, the iron impurities are always be wiped off by the magnetic barrels installed in the feeding port.

3.Quenching and tempering :it is the process of preheating so that to improve the temperature of the rice bran before puffing. After quenching and tempering the temperature will be controlled at 65–75 °C, and the moisture will be controlled at 10 ~12%. Thus, on the one side, it can increase the output of the extrusion machine, and on the other side, it can improve the quality of the puffed rice bran.

4.Puffing: the rice bran is injecting high pressure steam and high temperature water through the extrusion machine, so that it can improve the temperature and moisture in the extrusion machine,and can also form the high pressure to process the rice bran. All these can make the the rice bran become porous columnar structure from the original pulverized state.All these effectively passivate the activity of various of enzyme in the rice bran, and destroy the fat layer structure, so that it will be easier for the oil yield.

5.Drying:The moisture of puffed material comes from the extrusion machine is too big and the temperature is too high for direct leaching, the must be experience to process of drying and coo-ling, thus the moisture will reach 7%–9%, and temperature will reach 50-55°C. After puffing, the rice brain are usually dried and cooled by plat dryer.

Soybean oil making machine,good quality in South Africaby 35years experienced manufacturer

Soybean oil Solvent extraction equipment

Details of pre-treatment plant

a. Cleaning device:remove the raw material peanut in various impurities, such as: iron,
stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.

b.Crushing machine: peanut is crushed into 6-8 pieces. In order to meet the requirements
of crushing, the peanut is suitable for crushing with the moisture of 7% to 12%.

c. Softening process:the purpose of softening is to adjust the moisture and temperature
of oil, and make it soft.

d.Flaking process: rolling raw material into flakes, and the purpose is to increae surface
area, destroy the peanut cell tissue, shorten the way of oil out from cake.

e:Cooking process: use steam cooking, inject direct steam and cook the flakes to meet the
requirement of oil press.

f.Pre-press:press the flakes to leave about 16%-18% in the cake. The cake will go to extraction process.
g.Second oil press:Press the cake till the oil residue is about 5%.

Soybean oil pretreatment consumption in operation

Residual oil in cake

5%

Handling capacity

500kg-50tons/h

Crude oil moisture and volatile matter

0.30%

Power consumption

15KWh/T

Steam consumption

120Kg/T (0.8MPa)

Mechnical impurities

0.3% (adjustable)

Moisture in crude oil

0.2% qualified detonated experiment

Solvent extraction section introduction

Requirements for extraction cake ,steam ,water. electricity etc.

a.Adopting negative pressure evaporation can ensure excellent oil quality

b.Extraction system is highly adaptable,and can adapt to different oilseeds;
c.Unique exhaust gas absorption system ensure good absorption effect;
d.Full energy-saving design utilize heat energy for many times and saves steam consumption.

Soybean oil Solvent extraction in operation

Moisture of extraction material

5-8%

temperature of extraction material

50-55°C

oil content of extraction material

50-55°C

oil content of extraction material

14-18%

thickness of extraction cake

less than 13mm

powder porosity of extraction material

less than 15% (30 mesh)

steam

more than 0.6Mpa

solvent

national standard No. 6 solvent oil

electric powe

50HZ 3*380V±10%

Electric lighting

50HZ 220V ±10%

tempreture of supplement water

less than 25°C

Hardness

less than 10

volume of supplement water

1-2m/t raw material

temperature of recycle water

less than 32°C

4. Refining Process of Soybean oil press machine price

Degumming and deacidification:The gumming is moved by phosphoric acid and hot water. There are two ways to move the acid in the edible oil. One is chemical way, the other one is physical way.
The chemical way is using NaOH to react with acid.

This way is suitable for the capacity of 5-30T per day.

The physical way is using steam and centrifugal to move the acid.

This way is used for capacity from 30-2000T per day.
Decolorization:This step is used to adjust the color of the oil. You can control the color of the edible oil according to the requirement of your market.
Deodorization:The function of this step is to move the special smell in the oil. This is an important standard for refined edible oil.

Soybean oil refinery in operation

Oil residue of sunflower meal

1.0%

Moisture of meal

12% (adjustable)

Solvent residue of sunflower meal

500PPM

Total volatiles matter of crude oil

0.2%

Residual solvent of crude oil

100PPM

our achievement:

WorkGroup believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the possible manner on a long term and mutually beneficial basis. If you want to know more information about our sunflower oil plant or any other seed processing plant, please contact us in the following form. Our responsible, experienced sunflower oil processing technical team is always ready to serve and guide you at any time.

All the other oil seeds pre-treatment and oil refining equipment, sheller, cleaning sieve, cooker, filter and others is available at WorkGroup. If you want to know to start a vegetable oil pressing line with oil press machine, please contact us, we will offer you the best plan.

Soybean Oil Making Machine,Good Quality In South Africaby 35Years Experienced Manufacturer
Soybean Oil Making Machine,Good Quality In South Africaby 35Years Experienced Manufacturer price
Soybean Oil Making Machine,Good Quality In South Africaby 35Years Experienced Manufacturer supplier

Oil Processing Machinery Related Products